Dongfeng brand 7-8cbm garbage/waste truck, Hongyu factory adopts china famous brand Dongfeng chassis, adopts DF 7-8cbm type 2030 single row cab, wheelbase: 3800mm, 156 HP chaoyang brand engine, 4.2t rear axle, 7.50R16 steel wire tire, air brake, ABS, 6-speed gearbox....
3b福彩杀码7-8 cbm side loader garbage compactor truck
3b福彩杀码8275kg side loader compactor garbage collection truc
4x2,left or right side
emission standard (optional)
euro iii,iv, v
side loader garbage compactor
3b福彩杀码waste box capacity
on-board accessories: 1 set of on-board tools, several kinds of sealing rings and gaskets, vehicle instructions, maintenance manual
protective material: q235a carbon steel, connection mode: left and right side and rear lower protection are all welded, rear lower protection section size (mm): 100 × 50, rear lower protection height from the ground (mm): 385
dongfeng brand 7cbm garbage/waste truck,
3b福彩杀码hongyu factory adopts china famous brand dongfeng chassis, adopts df 7-8cbm type 2030 single row cab, wheelbase: 3800mm, 156 hp chaoyang brand engine, 4.2t rear axle, 7.50r16 steel wire tire, air brake, abs, 6-speed gearbox.
3b福彩杀码the upper plate is made of q345 manganese steel. the elevator is of pull rod type. the feeding port is equipped with a sealing cover plate. the rear door of the box is of double column lifting hydraulic opening / locking, with high-strength sealing. the bottom is equipped with a sewage tank device. the sewage tank at the bottom is linked through the sewage hose to prevent secondary pollution. the locking position of the rear door is equipped with a high-strength double locking hook, which can effectively to prevent the rear door from being squeezed and deformed when pushing the garbage, the inner pushing is provided with a sealing skin around, so as to prevent the garbage from being pushed and hung upside down when it is recovered.
Highlights and advantages of Dongfeng side loading and hanging bin compression garbage truck,
1. flat box, beautiful appearance, larger capacity.
2. pull rod elevator, stable speed, no bucket knocking.
3. the feeding port is provided with a sealing cover plate to prevent waste overflow and odor emission.
3b福彩杀码4. a sink is arranged under the rear tailgate to prevent waste water from being squeezed to the ground.
3b福彩杀码5. a sewage collection box is arranged at the bottom of the box to prevent secondary pollution.
6. the front end of the box (corresponding to the production pushing position) is provided with an open sewage port, which can clean up the garbage after pushing.
The Maintenance of side loading and hanging bin compression garbage truck,
1.during the running-in stage, the new truck runs within 1500-2500 km and unloads within 900 times of lifting box (pusher) ,the loading quantity shall be 70% of the rated load quality, and not to trampled the engine throttle with manganese during unloading.
3b福彩杀码2.after the cylinder working 300 times , all working oil should be replaced. turn on the oil release plug of the hydraulic tank and add new oil from the top oil hole, then started the engine, and try to operate the each cylinder twice to confirm its reliability.
3.high-pressure tubing is replaced regularly every two years. when cracks, damages and shoulder swelling are found in the course of use,it should be replaced in time.
← No Information